What is the best automatic pool cleaner (sweeper)?

Terry N

I have an inground pool and hate to vacuum the pool. What is the best one out there?

Answer
The absolute best would be a booster pump powered Polaris, any model. If your budget doesn't allow spending 1800 bucks then my vote is for both the Kreepy Krauly and the Hayward Navigator. Both have their strengths and weaknesses and a lot will depend if this is a concrete or vinyl pool. Kreepy's have a tendency to plow through just about anything, but they also tend to get stuck on many pool shapes unless you purchase the optional back up device for them. The Navigators don't tend to get stuck, but they are also not as adept at climbing walls or powering through heavy debris.

automatic pool vacuum help?

Dunham man

I Have a automatic pool vacuum that is a little old. it has a problem and i know how to fix it. my question is i don't know how to find it. i think its called a dirt demon and on the side it has a face with a tung sticking out. Please tell me how to find one or where i can buy it.

Answer
http://www.familyleisure.com/Pool-Supplies/Dirt-Demon-Automatic-Pool-Cleaner

Follow this link,

Powered by Yahoo! Answers

How do I lower the alkalinity in my pool?

automatic pool cleaner stuck image

Tony

The alkalinity in my in ground pool (25K gallons) is very high. It takes 20 drops in the tester to produce clear test. I've already bought a new tester. My ph is normal. How do I lower the alkalinity without also lowering the PH too much? I have to add acid but won't that also lower th PH too much?

Answer
You can lower the alkalinity with muriatic acid. 1.3 pints per 10,000 gallons will lower it by 10ppm. 3.25 pints in your pool will lower it by 10ppm. To get to the level you need of approximately 100-120 you will need to use 26 pints of muriatic acid to reduce it by 80ppm or 3.25 gallons of liquid muriatic acid.

You are testing the TA and getting 200ppm for your inground pool right? Make sure you walk a perimeter around the pool while pouring this in and wear proper safety equipment (eye protection and gloves) as muriatic acid is a diluted form of hydrochloric acid. Make sure you turn off any automatic chlorinators or remove chlorine pucks/sticks from the pool and NEVER let muriatic acid come into direct contact with chlorine products. Once in the water it will play safe but outside of water it will create chlorine gas which will kill a human in a matter of minutes.

You can get muriatic acid from the pool store or a local hardware store (sold as a cleaning agent).

Would a Taiwanese Guys go for a black girl?

Nissoue

I know dat it is really weird. But That question is really stuck in my head for some time now. because i am planning to move to Taiwan and I was really wondering about that. If i want to move there and spend maybe the rest of my life there, I would really like to know if there would be a possibility that I might get in a relationship while I am there. So could anyone tell me a little about it? I would like to be ready when I go there.

Answer
It's true what other people are saying that it's hard to know for sure until you try, but I can also share some thoughts that might help (I've been here 7 years).

First of all: race. I have wondered if white foreigners are treated differently from black foreigners. I can say that Taiwanese people are generally very friendly and interested in people from "the West", though I don't believe the maids/laborers from poorer countries like Indonesia, Thailand and the Philippines get the same level of respect. For example, I don't think America airs prime-time talk shows where rich white women complain about how lazy or incompetent their hispanic housemaids are, but I've seen the equivalent here. All that said, I believe it's more about economic status (and country of origin) than skin color.

I have a "light black" friend here (Afro-European mix) and I've asked him if he thinks girls treat him differently than a white guy. He doubts it. He's got looks and confidence, so he could probably overcome any bias if it were there.

I think the bigger issue is not your race but your sex. Many female foreign friends of mine have complained that all the foreign men are unavailable because they're dating Taiwanese girls, and the local men do not seem appealing. I think some of this may be because (I believe) that Asian men are unfairly seen in the West as lacking manliness when in fact they can be extremely manly. If you find Asian men attractive in spite of this cultural bias, then I think you will find that you have a large pool of suitors to choose from.

There are cultural differences too. To make a BIG generalization (don't take it too seriously), Asian men can be quite good at pampering their ladies, but they may not be so open to the "traditionally women's" tasks like cooking and cleaning. Traditional family values are strong here, and the man and woman each have their own roles. So you could say it is not as sexually liberated here as in the States, though things are slowly moving that way.

Guys will be interested in you, but they may feel a little intimidated (your automatic foreigner's reputation as a sex-crazed demon does not help this). You may need to move slowly and keep the guy at ease until he can open up with you more.

Lastly, some foreigners suspect that Taiwanese are just really good at hiding their racism behind a plastic smile. I tend not to believe this, but I think Lil Jay Zhou's comment is a funny coincidence. No one reading it could suspect he was the same guy who earlier said that white English teachers in Taiwan such as myself are all "rich, overpaid, alcoholic white-trash". Hopefully his bigotry is just the result of living in America too long and is not indicative of "real" Taiwanese.

Powered by Yahoo! Answers

What automatic pool vacuum works the best?

automatic pool cleaner stuck image

bigredgevo

I want to buy an automatic pool cleaner and researched many. I came to a conclusion to either get a Polaris or Hayward. I saw many Haywards for sale on eBay and they complained that it gets stuck because of the shape of their pool. So now I am looking to get a Polaris 280. Can anyone explain the difference between Polaris 280, 360, 380, and basically all the numbers? I just need a pool vacuum that will do the job without me having to interfere with it.

Answer
Above ground pool or in-ground pool.
If it is an above ground pool, go for the Hayward BUG.
In-ground pool cleaners, I would have to say Hayward or Kreepy .
The fewer working parts the better.
All of these robots can get stuck, in some pools.

What is the best automatic pool cleaner (sweeper)?

Terry N

I have an inground pool and hate to vacuum the pool. What is the best one out there?

Answer
The absolute best would be a booster pump powered Polaris, any model. If your budget doesn't allow spending 1800 bucks then my vote is for both the Kreepy Krauly and the Hayward Navigator. Both have their strengths and weaknesses and a lot will depend if this is a concrete or vinyl pool. Kreepy's have a tendency to plow through just about anything, but they also tend to get stuck on many pool shapes unless you purchase the optional back up device for them. The Navigators don't tend to get stuck, but they are also not as adept at climbing walls or powering through heavy debris.

Powered by Yahoo! Answers

Would a Taiwanese Guys go for a black girl?

automatic pool cleaner stuck image

Nissoue

I know dat it is really weird. But That question is really stuck in my head for some time now. because i am planning to move to Taiwan and I was really wondering about that. If i want to move there and spend maybe the rest of my life there, I would really like to know if there would be a possibility that I might get in a relationship while I am there. So could anyone tell me a little about it? I would like to be ready when I go there.

Answer
It's true what other people are saying that it's hard to know for sure until you try, but I can also share some thoughts that might help (I've been here 7 years).

First of all: race. I have wondered if white foreigners are treated differently from black foreigners. I can say that Taiwanese people are generally very friendly and interested in people from "the West", though I don't believe the maids/laborers from poorer countries like Indonesia, Thailand and the Philippines get the same level of respect. For example, I don't think America airs prime-time talk shows where rich white women complain about how lazy or incompetent their hispanic housemaids are, but I've seen the equivalent here. All that said, I believe it's more about economic status (and country of origin) than skin color.

I have a "light black" friend here (Afro-European mix) and I've asked him if he thinks girls treat him differently than a white guy. He doubts it. He's got looks and confidence, so he could probably overcome any bias if it were there.

I think the bigger issue is not your race but your sex. Many female foreign friends of mine have complained that all the foreign men are unavailable because they're dating Taiwanese girls, and the local men do not seem appealing. I think some of this may be because (I believe) that Asian men are unfairly seen in the West as lacking manliness when in fact they can be extremely manly. If you find Asian men attractive in spite of this cultural bias, then I think you will find that you have a large pool of suitors to choose from.

There are cultural differences too. To make a BIG generalization (don't take it too seriously), Asian men can be quite good at pampering their ladies, but they may not be so open to the "traditionally women's" tasks like cooking and cleaning. Traditional family values are strong here, and the man and woman each have their own roles. So you could say it is not as sexually liberated here as in the States, though things are slowly moving that way.

Guys will be interested in you, but they may feel a little intimidated (your automatic foreigner's reputation as a sex-crazed demon does not help this). You may need to move slowly and keep the guy at ease until he can open up with you more.

Lastly, some foreigners suspect that Taiwanese are just really good at hiding their racism behind a plastic smile. I tend not to believe this, but I think Lil Jay Zhou's comment is a funny coincidence. No one reading it could suspect he was the same guy who earlier said that white English teachers in Taiwan such as myself are all "rich, overpaid, alcoholic white-trash". Hopefully his bigotry is just the result of living in America too long and is not indicative of "real" Taiwanese.

how do above ground automatic pool cleaners work??

Hugeez

Answer
the most common form of pool cleaners are suction cleaners which have a hose that simply attaches through the skimmer. (If the pool has a main drain, it would need to be closed using the valve). The cleaner automatically moves around the bottom of the pool, sucking debris off the bottom of the pool and trapping it in the pump basket and filter. The pump basket should be emptied before and after the cleaning cycle. And the filter should be cleaned after cleaning the pool. Any large debris (leaves, sticks, and such) should be removed from the pool with a leaf rake before hooking up cleaner to prevent clogging up plumbing and allowing for a more effecient cleaning cycle. If you are considering purchasing a cleaner, I highly recommend the Zodiac brand. ( By the way, incase you're wondering, I own a swimming pool company and would be more than happy to answer any other questions you may have)

Powered by Yahoo! Answers

What is the best automatic pool cleaner (sweeper)?

automatic pool cleaner stuck image

Terry N

I have an inground pool and hate to vacuum the pool. What is the best one out there?

Answer
The absolute best would be a booster pump powered Polaris, any model. If your budget doesn't allow spending 1800 bucks then my vote is for both the Kreepy Krauly and the Hayward Navigator. Both have their strengths and weaknesses and a lot will depend if this is a concrete or vinyl pool. Kreepy's have a tendency to plow through just about anything, but they also tend to get stuck on many pool shapes unless you purchase the optional back up device for them. The Navigators don't tend to get stuck, but they are also not as adept at climbing walls or powering through heavy debris.

What is the best automatic inground pool cleaner? What brand and price?

Francaise

Its a vinyl inground pool. Rectangular 18x36. Also budget is an issue, I am looking at spending $500 or less.

Answer
After 25 years of hearing how great floor head systems are, I have come to a conclusion. If your pool would have stayed looking nice with any cleaning system in your pool, it will stay nice with a floor head system.
If you plan on owning a pool for 5-6 years, or longer, in my opinion the best cleaning system(Dollar for Dollar) is a Polaris 280 with a booster pump and a separate time clock. The reasons are as follows:
1.)Low cost of repairs. I have clients with Polaris 180âs that are 25 years old. (The 280 has the same drive system.) Total repair costs in 25 years are less than $300.00 total (Not counting bag replacements.) I Personally, have owned a Polaris 280 for almost 5 years and have not spent a dime. (other than on 2 bags, and one of them was torn by my kids, and the other by a big pine cone. )

2.)It will clean most pools spotless in 10-20 minutes per day. You have seen our (5) 40â plus Ponderosa pines that overhang our pool area. Not counting steps and love seat, if we keep the bag cleaned, the floor stays spotless.

3.)Initial installation costs should be in the $1400.00-1600.00 range. Floor head systems are usually about double the initial expense. Also, the motor for the cleaning system is usually a 2 H.P. or larger, and the pool needs to run for substantially greater times to even get close to what a Polaris will do in ½ hour or less. Also, if you are not the initial purchaser of the system, you will not get a lifetime warrantee. Replacement gear systems, floor heads, ⦠can average more than $200.00 per year after the first 2 year, not to mention if the cleaner is not working correctly, i.e. heads jammed in the up position, actuator gears jammed, ⦠you are running that large motor with absolutely no cleaning going on. Any way you look at it, running a ¾ H.P. booster motor for 20-30 minutes is going to be a lot cheaper than running a 2 H.P. for 3-4 hours. Add into this that most motors run for more than 2 hours per day seem to have a life span in the 5-6 year range, and that a 2 H.P. motor is about double the cost, I cannot see spending the money.

4.)Suction side cleaners have a lower initial cost, but are annoying because either they will not pick up sticks, twigs, small rocks, ⦠or they will, and then they will completely stop working until you spend 10 minutes pulling them out and cleaning the debris out of them. Some of these will end up needing replacement parts just because of punctured diaphragms, ⦠This is in addition to an average annual repair cost of about $200-250, after the first year or two. In less than 5 years(More likely 3 years), if you add in electricity savings, pool cleanliness and thus chemical costs savings, and electrical savings, you have more than paid for the Polaris. If you add to this the fact that, if you have a suction side cleaner, you will have had to bring it in to the shop at least 4-5 times, having a non-functional cleaning system, thus a horridly dirty pool at least 4-5 times, the fact that often it dies a slow death each time so your pool doesnât look right for months prior to each rebuilding, and the repeated hassles of needing to unplug the system when ever any ârealâ debris ends up in the pool, and I wonât have anything else in my pool, or my families pools. To summarize, If you are buying a cleaner and are selling the home quickly, I would probably go with a pool Vac(if there are no rocks, sticks, big leaves, ⦠In other words, dirt only, but your annual repair costs will be high) or a Kreepy Krauley if you have anything else(Or want 40% less repair costs than the Pool Vac).

5.)Floor heads, or suction cleaners destroy the natural water flow around the pool which is responsible for moving the debris around to the skimmer on the surface, and for moving silt, and dirt to the main drain. Therefore, the surface areas of both sides of the pool(If the cleaners are functioning properly) will be an average of 20-40% dirtier than the same pool with a pool vac, return lines properly adjusted, and approximately ¾ of the suction of the pool going to the main drain. Also, since almost all of the suction for a suction side cleaner is directed to the cleaner, and thatâs run through an extra 30 feet or so of corrugated hose, the water flow is greatly reduced, and to get the same water filtration you will need to run that system approximately 25% -30% longer than a system without a suction cleaner. Thatâs 1 ¾ hrs longer running a 1 H.P. motor than is needed to run the ¾ H.P booster. Also, as a suction cleaner picks up debris, assuming it doesnât get plugged up and stop functioning all together, the baskets will fill up and all the suction to the pool will decrease or stop. There are times during the year where about 60% of the repair work I do is related to suction cleaning systems picking up too much debris. Note: This is never covered under any warrantee.

There is more that I could add, but I am too tired to do so now. Installation is as follows:

Powered by Yahoo! Answers

What automatic pool vacuum works the best?

automatic pool cleaner stuck image

bigredgevo

I want to buy an automatic pool cleaner and researched many. I came to a conclusion to either get a Polaris or Hayward. I saw many Haywards for sale on eBay and they complained that it gets stuck because of the shape of their pool. So now I am looking to get a Polaris 280. Can anyone explain the difference between Polaris 280, 360, 380, and basically all the numbers? I just need a pool vacuum that will do the job without me having to interfere with it.

Answer
Above ground pool or in-ground pool.
If it is an above ground pool, go for the Hayward BUG.
In-ground pool cleaners, I would have to say Hayward or Kreepy .
The fewer working parts the better.
All of these robots can get stuck, in some pools.

What is the best automatic pool cleaner (sweeper)?

Terry N

I have an inground pool and hate to vacuum the pool. What is the best one out there?

Answer
The absolute best would be a booster pump powered Polaris, any model. If your budget doesn't allow spending 1800 bucks then my vote is for both the Kreepy Krauly and the Hayward Navigator. Both have their strengths and weaknesses and a lot will depend if this is a concrete or vinyl pool. Kreepy's have a tendency to plow through just about anything, but they also tend to get stuck on many pool shapes unless you purchase the optional back up device for them. The Navigators don't tend to get stuck, but they are also not as adept at climbing walls or powering through heavy debris.

Powered by Yahoo! Answers

how do above ground automatic pool cleaners work??

automatic pool cleaner stuck image

Hugeez

Answer
the most common form of pool cleaners are suction cleaners which have a hose that simply attaches through the skimmer. (If the pool has a main drain, it would need to be closed using the valve). The cleaner automatically moves around the bottom of the pool, sucking debris off the bottom of the pool and trapping it in the pump basket and filter. The pump basket should be emptied before and after the cleaning cycle. And the filter should be cleaned after cleaning the pool. Any large debris (leaves, sticks, and such) should be removed from the pool with a leaf rake before hooking up cleaner to prevent clogging up plumbing and allowing for a more effecient cleaning cycle. If you are considering purchasing a cleaner, I highly recommend the Zodiac brand. ( By the way, incase you're wondering, I own a swimming pool company and would be more than happy to answer any other questions you may have)

How to run pool filter/motor?

A

I have a swimming pool 6 x 6 Meters 2 m height,
Yesterday a company came and clean my pool and add chemical stuffs, told me to fill it with water and in the morning they will come to activate ,run filter or motor i dont know

I paid all, but it seems they won't come back maybe theives... but anyways anyone know whats the next step to do?. how to run filter motor?.. I don't know,, I have like a big pumb thing and other one is near the water storage room with a small machine that can set filters or motor automatic... anyone can help? i don't want the water to get dirty because I wasted alot of money already .

Answer
On mine there is a toggle switch at the rear bottom of the motor. you flip it on or off and the motor starts. Turn the shaft by hand if it has set off for a extended time to make sure the impeller blades are free in the pump. They stick and you can rip them off on starting. Once started you go to the timer. look at your clock and set the time. then open the cover and move the 2 colored pegs for on at such time. then the other set to turn it off at such time. You need water above the intake before turning on the pump. and prime the pump first. On mine to do that you open the valve above the impeller house and let water out to remove the air in it.

Powered by Yahoo! Answers

How much chlorine will I use in my pool?

automatic pool cleaner stuck image

z400wood

We just bought a house in MI with a 16x32 inground pool. I am getting ready to buy chemicals for it. The pool has an automatic chlorinator and I am wondering whether or not to buy 3" or 1" tabs or the sticks or whatever else there is. Also how many pounds of chlorine will I go through in the summer running the pump for 12 hours a day. Any other pool tips or chemical advice would be greatly appreciated.

Answer
You definetly DO have to chlorinate a private residential pool, otherwise you will very quickly have a swamp rather than a swimming pool. Go with the 3" tabs, they dissolve less quickly so you won't have to add tabs but about every one to two weeks ( I have some pools on my route that I only have to add once a month). As far as how much to buy, as with everything, the more you buy the more you save. It does not expire so if you have some left at the end of the season, just store until the next.

As far as other tips, the key to keeping a nice pool if preventative maintenance ( as with any investment).
I recommend taking one day a week (only an hour or so) and perform maintenance:
*clean the water line (with a tile/vinyl cleaner from your local pool store)
*Remove large debris from bottom of pool with a leaf rake (large deep net that attaches to the end of telescopic pole)
*empty skimmer and pump baskets
*vacuum pool
*clean filter according to filter type (backwash sand filter, *clean cartridge elements in cartridge filter, and for DE backwash and recharge with DE)
*Test chemicals -- Test Chlorine and pH weekly, Total Alkalinty biweekly, and Calcium Hardness monthly.

Recommended chemical levels:
Chlorine: 1-5 ppm
pH: 7.2-7.6
Total Alkalinity: 80-120 ppm
Calcium Hardness: 200-300 ppm

In addition to chlorine, you will need to purchase other chemicals for balancing, namely Sodium Bicarbonate (for Total Alkalinity), Soda Ash (for pH), and Calcium Chloride( for calcium). If you would ever need to lower the pH, use Muriatic Acid.

You can buy these chemicals at your local pool store. They will most likely try to sell you BioGuard or some other brand of pool chemicals. The ones that I named are what we call bulk chemicals, they come in 50 lb. bags and are much less expensive. They are the exact same thing, you're just not paying for advertisement. Again they do not go bad, so you can save them for years. Just make sure you store chemicals out of the elements.

I recommend getting yourself a good test kit (the best is made by Taylor). Do not use test strips as they are difficult to read and often wrong.

I see that you are in michigan. If you happen to be near the Saginaw/ Bay City area there is a great company there called Cherokee Pools. They have a retail store and also do service if you would ever need any repair work done.( My husband got his start with them years ago and we now own our own business in Myrtle Beach).

If you have any other questions I would be more than happy to answer them.

How do I lower the alkalinity in my pool?

Tony

The alkalinity in my in ground pool (25K gallons) is very high. It takes 20 drops in the tester to produce clear test. I've already bought a new tester. My ph is normal. How do I lower the alkalinity without also lowering the PH too much? I have to add acid but won't that also lower th PH too much?

Answer
You can lower the alkalinity with muriatic acid. 1.3 pints per 10,000 gallons will lower it by 10ppm. 3.25 pints in your pool will lower it by 10ppm. To get to the level you need of approximately 100-120 you will need to use 26 pints of muriatic acid to reduce it by 80ppm or 3.25 gallons of liquid muriatic acid.

You are testing the TA and getting 200ppm for your inground pool right? Make sure you walk a perimeter around the pool while pouring this in and wear proper safety equipment (eye protection and gloves) as muriatic acid is a diluted form of hydrochloric acid. Make sure you turn off any automatic chlorinators or remove chlorine pucks/sticks from the pool and NEVER let muriatic acid come into direct contact with chlorine products. Once in the water it will play safe but outside of water it will create chlorine gas which will kill a human in a matter of minutes.

You can get muriatic acid from the pool store or a local hardware store (sold as a cleaning agent).

Powered by Yahoo! Answers

What is the best automatic pool cleaner (sweeper)?

automatic pool cleaner stuck image

Terry N

I have an inground pool and hate to vacuum the pool. What is the best one out there?

Answer
The absolute best would be a booster pump powered Polaris, any model. If your budget doesn't allow spending 1800 bucks then my vote is for both the Kreepy Krauly and the Hayward Navigator. Both have their strengths and weaknesses and a lot will depend if this is a concrete or vinyl pool. Kreepy's have a tendency to plow through just about anything, but they also tend to get stuck on many pool shapes unless you purchase the optional back up device for them. The Navigators don't tend to get stuck, but they are also not as adept at climbing walls or powering through heavy debris.

What is the best automatic inground pool cleaner? What brand and price?

Francaise

Its a vinyl inground pool. Rectangular 18x36. Also budget is an issue, I am looking at spending $500 or less.

Answer
After 25 years of hearing how great floor head systems are, I have come to a conclusion. If your pool would have stayed looking nice with any cleaning system in your pool, it will stay nice with a floor head system.
If you plan on owning a pool for 5-6 years, or longer, in my opinion the best cleaning system(Dollar for Dollar) is a Polaris 280 with a booster pump and a separate time clock. The reasons are as follows:
1.)Low cost of repairs. I have clients with Polaris 180âs that are 25 years old. (The 280 has the same drive system.) Total repair costs in 25 years are less than $300.00 total (Not counting bag replacements.) I Personally, have owned a Polaris 280 for almost 5 years and have not spent a dime. (other than on 2 bags, and one of them was torn by my kids, and the other by a big pine cone. )

2.)It will clean most pools spotless in 10-20 minutes per day. You have seen our (5) 40â plus Ponderosa pines that overhang our pool area. Not counting steps and love seat, if we keep the bag cleaned, the floor stays spotless.

3.)Initial installation costs should be in the $1400.00-1600.00 range. Floor head systems are usually about double the initial expense. Also, the motor for the cleaning system is usually a 2 H.P. or larger, and the pool needs to run for substantially greater times to even get close to what a Polaris will do in ½ hour or less. Also, if you are not the initial purchaser of the system, you will not get a lifetime warrantee. Replacement gear systems, floor heads, ⦠can average more than $200.00 per year after the first 2 year, not to mention if the cleaner is not working correctly, i.e. heads jammed in the up position, actuator gears jammed, ⦠you are running that large motor with absolutely no cleaning going on. Any way you look at it, running a ¾ H.P. booster motor for 20-30 minutes is going to be a lot cheaper than running a 2 H.P. for 3-4 hours. Add into this that most motors run for more than 2 hours per day seem to have a life span in the 5-6 year range, and that a 2 H.P. motor is about double the cost, I cannot see spending the money.

4.)Suction side cleaners have a lower initial cost, but are annoying because either they will not pick up sticks, twigs, small rocks, ⦠or they will, and then they will completely stop working until you spend 10 minutes pulling them out and cleaning the debris out of them. Some of these will end up needing replacement parts just because of punctured diaphragms, ⦠This is in addition to an average annual repair cost of about $200-250, after the first year or two. In less than 5 years(More likely 3 years), if you add in electricity savings, pool cleanliness and thus chemical costs savings, and electrical savings, you have more than paid for the Polaris. If you add to this the fact that, if you have a suction side cleaner, you will have had to bring it in to the shop at least 4-5 times, having a non-functional cleaning system, thus a horridly dirty pool at least 4-5 times, the fact that often it dies a slow death each time so your pool doesnât look right for months prior to each rebuilding, and the repeated hassles of needing to unplug the system when ever any ârealâ debris ends up in the pool, and I wonât have anything else in my pool, or my families pools. To summarize, If you are buying a cleaner and are selling the home quickly, I would probably go with a pool Vac(if there are no rocks, sticks, big leaves, ⦠In other words, dirt only, but your annual repair costs will be high) or a Kreepy Krauley if you have anything else(Or want 40% less repair costs than the Pool Vac).

5.)Floor heads, or suction cleaners destroy the natural water flow around the pool which is responsible for moving the debris around to the skimmer on the surface, and for moving silt, and dirt to the main drain. Therefore, the surface areas of both sides of the pool(If the cleaners are functioning properly) will be an average of 20-40% dirtier than the same pool with a pool vac, return lines properly adjusted, and approximately ¾ of the suction of the pool going to the main drain. Also, since almost all of the suction for a suction side cleaner is directed to the cleaner, and thatâs run through an extra 30 feet or so of corrugated hose, the water flow is greatly reduced, and to get the same water filtration you will need to run that system approximately 25% -30% longer than a system without a suction cleaner. Thatâs 1 ¾ hrs longer running a 1 H.P. motor than is needed to run the ¾ H.P booster. Also, as a suction cleaner picks up debris, assuming it doesnât get plugged up and stop functioning all together, the baskets will fill up and all the suction to the pool will decrease or stop. There are times during the year where about 60% of the repair work I do is related to suction cleaning systems picking up too much debris. Note: This is never covered under any warrantee.

There is more that I could add, but I am too tired to do so now. Installation is as follows:

Powered by Yahoo! Answers