How do i use the manual pool cleaner for my inground pool?

best in ground automatic pool cleaner image

Aimee

How should i set the skimmer/pool drain valves? Should i turn off the pool drain and have all the water being sucked from one skimmer? or keep both skimmers sucking in water and leave the drain off?

Our automatic pool cleaner is not working correctly and i have never had to manually clean the pool before :-/

Answer
Skimmer/drain valve to all skimmer and then all suction to only one skimmer. This provides the maximum possible suction for the pool vac. If that turns out to be so much suction that it is hard to push the vac across the pool floor, then adjust the valve to allow a little suction at the other skimmer.

There isn't really a standard design for in ground pools - they have different configurations of drains, skimmers, pumps, filters. You find what works for yours and go with that.

How many Psi/Atm needed for a low pressure and a high pressure vacuum cleaners such as the Kreepy Krauler ones?

Spida59

I was wondering how mch Psi/Atm needed for the high and low pressure pool vacuumes such as The Surfer Above Ground Automatic pool cleaner.
For A POOL Vacuum Cleaner (Above Ground automatic vacuum cleaner)

Answer
You can never have more than 1 atm in a vacuum system. Obviously the more vacuum you generate, the better it will clean. Most vacuum cleaners probably produce between 50-80 inches of water vacuum.

Powered by Yahoo! Answers