Kamis, 17 April 2014

How to connect an automatic pool cleaner (Cruiser C400).?




Cat


Should the pump be set to filtration or circulation? and should both the skimmer and bottom valves be left open?


Answer
Close the bottom drain. If your pool has a side drain, connect the pool cleaner there. If not, put a y-fitting into the skimmer and tie your pool cleaner in there. Set the pump for filtration to take out the stuff the pool cleaner picks up.

My neighbor tied his pool cleaner into one of the bottom drains and plugged the other. That seems to work ok too but you have to fool around with the balance between the two drains to get the pool cleaner to work.

how do above ground automatic pool cleaners work??




Hugeez





Answer
the most common form of pool cleaners are suction cleaners which have a hose that simply attaches through the skimmer. (If the pool has a main drain, it would need to be closed using the valve). The cleaner automatically moves around the bottom of the pool, sucking debris off the bottom of the pool and trapping it in the pump basket and filter. The pump basket should be emptied before and after the cleaning cycle. And the filter should be cleaned after cleaning the pool. Any large debris (leaves, sticks, and such) should be removed from the pool with a leaf rake before hooking up cleaner to prevent clogging up plumbing and allowing for a more effecient cleaning cycle. If you are considering purchasing a cleaner, I highly recommend the Zodiac brand. ( By the way, incase you're wondering, I own a swimming pool company and would be more than happy to answer any other questions you may have)




Powered by Yahoo! Answers

Tidak ada komentar:

Posting Komentar