Q. I have a Pentair Legend Pool cleaner. The tail constantly whips out of the water whenever it makes a turn and shoots water everywhere. It didn't used to do it so I know that something is not right. I'm tired of cleaning my windows :) Any ideas?
Answer
Two things to try:
1)There should be adjustment screw near tail attatchment point that controls the strength of tail water jet
2)there is a tail weight available from polaris pool cleaner tyhat will also fit on legend
more tips here: http://www.swimming-pool-information.com/automatic-pool-cleaner-problems.html
Two things to try:
1)There should be adjustment screw near tail attatchment point that controls the strength of tail water jet
2)there is a tail weight available from polaris pool cleaner tyhat will also fit on legend
more tips here: http://www.swimming-pool-information.com/automatic-pool-cleaner-problems.html
Pentair Automatic Pool Vacuum?
Q. I have a Pentair Legend Robotic Pool Cleaner. It will run for a short time but constantly return to the wall where it is plugged in to on the side of the pool where it stays until we untangle the hose. I have a feeling that it is something to do with the hose but can't figure it out. Any suggestions would be welcomed.
Thank you.
Thank you.
Answer
if it is battery operated it needs a new battery. it has a built in sensor that tells is to return to the charging station when the battery voltage starts getting low.
if it is battery operated it needs a new battery. it has a built in sensor that tells is to return to the charging station when the battery voltage starts getting low.
Powered by Yahoo! Answers
Tidak ada komentar:
Posting Komentar