What is the best automatic pool cleaner?

N.

I have a below ground pool and am trying to find reviews on automatic pool cleaners. Consumer Reports doesn't seem to have anything on the subject :( Can anyone lend some insight and perspective on automatic pool cleaners and make a recommendation? Much thanks in advance.

Answer
Suction-Side Automatic Pool Cleaners

In researching suction-side cleaners, weâve found that the Stanley PoolTec DLX In-Ground Automatic Pool Vacuum Cleaner is the newest and most innovative way to keep your pool clean. The trusted brand of Stanley, with its master craftsmanship and innovative design provides a cleaner that is easy to install and operate and provides continuous cleaning of most in-ground pools. Operating with your poolâs filter, this suction cleaning mechanism maintains a proper angle for optimal performance while cleaning pools with depths of 9 ft.

Pressure-Side Automatic Pool Cleaners

If you are looking for a pressure-side cleaner and you want your pool cleaned quickly and completely, we recommend the Kreepy Krauly Legend cleaner from Pentair. A host of design features combine to keep the Legend cleaner on the move, thoroughly cleaning most pools in just 1 to 3 hours. The debris channel and large intake throat handles leaves, twigs and other large debris with ease. The Front-wheel drive generates maximum traction on inclined surfaces for total coverage of pool bottom and walls. The independent booster pump helps provide optimum cleaning power and unimpeded surface skimming. Another great feature is that disposable cleaner bags are also availableâno need to empty or touch debris again.



Robotic / Electronic Automatic Pool Cleaners

Many consumers are now selecting incredibly efficient robotic units as their cleaners of choice. These are great at cleaning small debris and sand as well as one of the only types that clean and scrub the walls and tile line. The Dolphin Supreme M3 and M4 from Maytronics are great options for robotic cleaners. These award-winning models have features that are designed for customers and are backed by the Maytronics name which has provided 25 years of technological leadership. Not only are Dolphin M3 and M4 energy efficient (average cost of less than $0.15 to clean the pool), but they have weekly timers where a user can preset cleanings throughout the week.

Here are some more links to more information. I hope this helps.

I am looking to purchase an automatic pool cleaner, any suggestions? ?

Chris

I have an in-ground vinyl liner pool that is 17x36. At its deepest point, it is 8.5 feet deep with sloped walls and tight corners going down. (Someone called it a diving pool?) I want one that is self contained and doesn't hook up to my filter. I was originally looking at the Dolphin Diagnostic Advantage (DL2019) In-Ground Robotic Pool Cleaner but am open for suggestions. Anyone have any experience with these or can throw me some pros or cons of a different type? I am not willing to spend more than a $1,000.00.

Answer
Look at any of the Polaris products. They come in several different types of pool cleaners and price range.


Google:

Reviews and prices on automatic pool cleaners.



:-)

Powered by Yahoo! Answers

Automatic vacuum cleaner problems!!! PLEASE HELP?

Kelsey

We just got an above ground pool this year and it came with a manual vacuum. It dosnt really work good, so my dad bought a n automatic one. It keeps getting stuck on the ladder. Its a Barracuda brand something like that. Does anyone know how to fix that problem? Its one of those that has a flat thing at the bottom and a round collar around the top so it stays so far out of the walls please any help!!
Thanks

Answer
There is a ladder guard that you can purchase for the Barracuda pool cleaner. It is sold as an option accessory and is made specifically to remedy this problem. I believe that their part number is #W24000. You can get one with an retailer that sells Barracuda parts or probably directly from the company.

Polaris 280 pool cleaner qeustion?

rob

ok. i have a polaris 280 automatic pool cleaner. for some reason it just sits in one spot! it used to zip around the whole pool. now its stationary. Please help!!

Answer
I was surprised to see this in the boating area, but I just happen to be a pool technician, been one for 20 years. With the equipment running, pick the cleaner up and see if the wheels are turning. If not, do they turn freely by hand? If they turn freely by hand, then you have a plugged jet that drives the wheels, and it is trying to move with only the jet at the back of it. I would recommend you take it in to have the jet cleaned out, unless your familiar with taking it apart. A word of caution though, this is the most common thing that pool stores miss on the Polaris.

If you don't have good water pressure, try checking the screen where it comes out of the pool wall, at the regulator valve, and that your pump is working properly.

Good luck!

Powered by Yahoo! Answers

Anyone know an easy way to get wrinkles from the bottom of a pool liner (above ground) after water is in?

automatic pool cleaner walls image

Troy

Just put up a new above ground pool and the installers left some pretty big wrinkles in the bottom of the liner. Since there's already water in it, how can this be fixed without emptying it completely?

Answer
If it was an inch of water or so, you can push the wrinkles out towards the wall but if there's more water than that in there, sorry, ain't gonna happen. Normally during an installation , there's some one in the pool scouting out wrinkles as the pool fills and the liner vac is going (they did use a vacuum to suck the air out behind the liner to remove the wrinkles, right?). That way you can catch them and push them out before you get to the point where there's an inch of water.
Sometimes you'll see small wrinkles that are actually what we call packing creases. The liner has been in a box , folded for some time. It will get creases. Most are minor and will work themselves out if they are rounded at the top. If they are sharp ridged, they need help. Normally during the fill stage, with the liner vac going and only half an inch of water in the pool, you can get these stubborn packing creases out with a kettle of boiling water poured on the area. That usually works to make the vinyl pliable enough that the weight of the water will push out the wrinkle, if there's not much of a ridge.

Your choices here are two.
If they're minor, you may choose to live with them. They won't be going away though and if you use an automatic cleaner, the cleaner head may eventually wear through the ridge of the crease, causing a leak.
If they are large or have a sharp ridge, I'd be getting the installers back to drain and kick the wrinkles out very soon.

Are there online instructions for swimming pool maintenance?

caroll

Answer
I use an Aqualux system. For the last three years I have done nothing but keep the pH level balanced. Very easy.

http://users.iafrica.com/a/am/amos/aqualux.htm

(From the site)
Finally a few tips for effective pool care:

Dust, leaves and debris blown in by the wind quickly spoil the look of a pool, while the suntan oils, make-up, sweat from the constant use of swimmers escaping the heat, also mar the purity of the water.

Firstly, clean all the leaves and debris out of the leaf traps both in the weir and the sludge trap, because if water cannot flow to the filter, it cannot be filtered.

Do a good backwash. To get the filter reasonably clean one must backwash for at least 3 minutes followed by a 1 minute rinse. If backwash was not done for a couple of weeks, repeat this process twice.

The next step is to carry out the necessary water tests and correct pH if necessary. It is important to remember that correctly balanced water creates an unfavourable environment for bacteria to grow in.

Next, water level. The water level of the pool should be checked regularly. Dirt and leaves will not skim off into the weir if the level is not correct. If the water level sinks more rapidly than experienced with normal evaporation the pool floor and walls should be checked for cracks.

If an automatic pool cleaner is used it should not run continuously. It is just a water vacuum cleaner and therefore should only be used when the floor and the walls of the pool are dirty. The top 25cm (approx. 10 inches) of water is the area where bacteria flourishes and this water will not be filtered if the
cleaner is continuously in use.

Leaves and debris, not skimmed automatically because the pool cleaner is in constant use, become waterlogged and drop to the floor of the pool. Most pool cleaners have a pulverising action and when the debris is sucked up it becomes a sludge which dirties the filter sand much more quickly.

It is essential to run the filter for at least eight hours every day.

With an automatic pool cleaner this should be increased to twelve hours because of the restricted water flow through the pool cleaner and hoses.

Powered by Yahoo! Answers